Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Pace 1000M Sidetalk pcb/layout

HavaV10

HavaV10

Active Member
May 24, 2023
170
36
38
57
Lake Havasu City, Arizona
Just realized I might be using the wrong schematic/board layout I found on CB Tricks. My Pace 1000M only has 2 transformers on the right while the pcb layout is showing 3 of them. Also tank coils are not in the correct orientation. Anyone know were to find the correct schematic/pcb layout for my Pace 1000M 23 channel? Thanks.
 

Attachments

  • 20230709_080026_edited.jpg
    20230709_080026_edited.jpg
    6.6 MB · Views: 7
  • Clipboard01_edited.jpg
    Clipboard01_edited.jpg
    481.1 KB · Views: 7


dxChat
Help Users
  • No one is chatting at the moment.
  • @ Hambones amps:
    Does anyone know if you can replace the 2290 in a galaxy dx 93t twin turbine with a 2sc2879 red dot? If so, what would have to be tuned?
  • @ BayouRadioAmplifier:
    hello
  • @ ShadowDelaware:
    Hambones the entire amp section would have to be retuned, and the rf transformers re wrapped.
  • @ BJ radionut:


      Top Bottom