You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
something like a knife edge , stick it under the edge of the front of back about a half inch and pry the plastic up till it pops out . there's grooves in the sides that hold it in place . id suggest doing it in a place that's warm ...... just in case the plastic is the kind that will crack if its very cold when flexed .
It's a bit corroded inside, it worked perfectly last time I used it, but the power leads are too short and brittle, it looks like it has been abused quite much, I got it free with a Cobra 25 LTD classic. So no losses then...
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.