• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

PDL 2 switch box

Here is some pdl2 info

Forward Gain 12 dBi; Rejection 32dB
VSWR 1.3:1 (1-40CH.)
Safety Factor 2000W
Boom Length 4'10"
Wgt. 13.5lbs
Wind Load 2.0 sq. ft.
 
I have one from a PDL ( I think ) but mine has 2 boxes bolted together , jumper wire between them . Not sure now but I thought when it was given to me it came off my BIL's old PDL ? Probelm is it might be a sort of " Hack Job " one box has Electrical Tape holding to switches down ? Heck I'm just going to take it apart ! :LOL: Stay Healthy & Safe ! 73 & God Bless , Leo
 
  • Like
Reactions: Tokin
I have a similar Avanti switch box just no AUX. got in a box of with some old radios

CIMG0094.jpg


CIMG0095.jpg


CIMG0097.jpg
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.