• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

President Lincoln 2+ V3 not switching into transmit properly

Lkaskel

Well-Known Member
I Support WorldwideDX.com!
Aug 4, 2017
544
439
73
62
Hi Everyone,
On the bench is a President Lincoln 2+ with an interesting transmit issue. When you key the mic TX shows on the display but the radio stays in receive. This is on all of the modes. Any thoughts?

Thanks as always!!
 

Hi Everyone,
On the bench is a President Lincoln 2+ with an interesting transmit issue. When you key the mic TX shows on the display but the radio stays in receive. This is on all of the modes. Any thoughts?

Thanks as always!!
Start with simple things, try a different microphone to rule that out?
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ COWBOYS:
    Denton GL 1000 ham amp comes on, but will not key up
  • @ COWBOYS:
    What can I do to make my Denton GLS 1000 amp to load ?
  • @ AudioShockwav:
    Try starting a new thread in the Amplifier section and asking the question, more people will see it to respond.
  • @ iw7ed:
    hello