• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

President Lincoln 2+ V3 not switching into transmit properly

Lkaskel

Well-Known Member
I Support WorldwideDX.com!
Aug 4, 2017
541
439
73
61
Hi Everyone,
On the bench is a President Lincoln 2+ with an interesting transmit issue. When you key the mic TX shows on the display but the radio stays in receive. This is on all of the modes. Any thoughts?

Thanks as always!!
 

Hi Everyone,
On the bench is a President Lincoln 2+ with an interesting transmit issue. When you key the mic TX shows on the display but the radio stays in receive. This is on all of the modes. Any thoughts?

Thanks as always!!
Start with simple things, try a different microphone to rule that out?
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.