PRESIDENT WASHINGTON PLL858 RADIO CHANNEL SELECTOR?

[OldTech03]

Thought I would ask you never know. I brought back from the dead a PRESIDENT WASHINGTON it tested my patience and forced me to get back to what I used to teach with respect to the proper approach to trouble shooting, anyway. After fixing all the problems it become obvious the channel selector would not respond to at least 10 attempts at using different cleaning agents it works but it's very undependable. So anybody have an old unit sitting around with a hopefully good channel selector switch. And yes I'm aware there are other options if I need to I can install any number of digital substitutes and I don't really have an issue with that idea just didn't want to invest that much in the project although the customer units I did with them all worked out great.

vintagetech52@gmail.com
719-453-4722 text or call
B52 ON skip
KD9OAE

 

[loosecannon]

just how much of the channel selector do you need?

I have a couple from madisons i converted to encoders, but i don't think the flimsy plastic with the traces will work for you.

but if you just want the selector itself i have one for you.
LC

 

[OldTech03]

just how much of the channel selector do you need?

I have a couple from madisons i converted to encoders, but i don't think the flimsy plastic with the traces will work for you.

but if you just want the selector itself i have one for you.
LC

 

[OldTech03]

If this is what you have I'm interested.

 

[OldTech03]

If this is what you have I'm interested.

If the ribbon cable is with it that is fine as well. Let me know what you need for it and shipping and I will get it to you. Oh I assume it worked you just replaced it with something else.

 

[loosecannon]

yeah this should work just fine for you.

yes, the selector worked fine and turns nicely.

I used to put a lot of digimax kits in madisons for people so i have a stash of these.
I don't care about the money, just give me enough to ship it to you in a small flat rate box.

you can shoot me a message here on the forum with your address and we'll work out the money transfer.
LC

 

[OldTech03]

yeah this should work just fine for you.

yes, the selector worked fine and turns nicely.

I used to put a lot of digimax kits in madisons for people so i have a stash of these.
I don't care about the money, just give me enough to ship it to you in a small flat rate box.

you can shoot me a message here on the forum with your address and we'll work out the money transfer.
LC

Still there have not heard from you in over a week, Just wondering.

 

[loosecannon]

Hi OT03,

I apologize if there was any confusion, i was asking you to send me a private message here on the forum so we could exchange information.

I'll send you an email tonight.
LC

 

[OldTech03]

Hi OT03,

I apologize if there was any confusion, i was asking you to send me a private message here on the forum so we could exchange information.

I'll send you an email tonight.
LC

I thought I did send you a message I must have screwed it up somehow.