Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Propagation

Sonwatcher

Sonwatcher

Active Member
Apr 6, 2005
3,413
26
48
Colorado
A tool for finding out if the band you are interested in operating on is open, dead or just quiet.

This table gives the minute and second of the start of the first transmission within the hour for each beacon on each frequency. A transmission consists of the call sign of the beacon sent at 22 words per minute, followed by four 1 second dashes. The call sign and the first dash are sent at 100 W. The remaining dashes are sent at 10 W, 1 W and 100 mW.
Click to expand...
http://www.arrl.org/news/features/2007/05/03/1/?nc=1

Go here for Beacon chart
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom