Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

QRP to the ISS Article

K

K6LCS

Member
Jan 16, 2012
1
0
11
Doug Cook KD5PDN's first-rate article - "QRP to the ISS" - appears in the February, 2012 issue of QST magazine.

Doug walks the reader through building a simple tape measure beam, and how to successfully work the ISS with it and a handheld radio.

Not an ARRL member receiving QST magazine? Doug's article is available online on the SAT SKEDS page of my Work-Sat.com Web site ...

Satellite Schedules

Thanks to the ARRL for permission to re-publish ... and many thanks to Doug for citing my satellite site in the article.

Clint Bradford, K6LCS
http://www.work-sat.com
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom