• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

QRZ.com?????

Status
Not open for further replies.

Radio75

RadioActive OM
Sep 23, 2010
49
0
16
68
Hooterville, SD
What's going on with qrz.com?
My biography disappeared, and it will not let me log in, siting incorrect password.
It won't let me reset my password either.
Anyone else having any problems??
 

QRZ migrated to new servers and I believe a newer version of the forum.
There is a sticky there explaining.

Post migration there have been a few bugs.
They are being addressed as discovered.

William
 
I just checked.

All the same guys answering every single question in the mics and audio section. Same guys all used to say 2.1 khz is plenty of bandwidth for sideband. They are learning very slowly.

No. Nothing different.
 
ADMIN was quick to respond with a password reset, so I am back on.
Problem is, when my new call was added, all the info (BIO, pics, etc) from my old call was "disappeared".
No big deal, just had me going there for a bit!
:crying:
 
I just checked.

All the same guys answering every single question in the mics and audio section. Same guys all used to say 2.1 khz is plenty of bandwidth for sideband. They are learning very slowly.

No. Nothing different.

There are tons of guys working 3 and 4 khz either side of the frequency they are working all the time.
 
Status
Not open for further replies.

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.