Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Radioddity CB-500 works on 10 meter repeaters!

Moleculo

Moleculo

Ham Radio Nerd
Apr 14, 2002
9,322
2,015
383
When I received the Radioddity CB-500 from the factory for evaluation, I noticed that the band chart included frequencies on 10 meters. It also has both CTCSS tones, DCS, and an offset setting, so I was curious if I could get it to work on 10 meter repeaters. Short answer is YES, it works! Check it out:

 
  • Like
Reactions: sp5it, Pez, Woody-202 and 3 others

FYI, I renamed the band "I" to "-R". That way, when you TX using repeater offset, the screen goes from "10" to "-R" (for - repeater offset). It s a great little rig for 10m FM.

73
 
  • Like
Reactions: Shadetree Mechanic

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom