So I had a blown cpu ept695042z
I fitted a dpt295042z
everything works except there is no speaker sound
Or receive
all the connections are numbered the same but the new board doesn’t have echip only jumper to wideband it which is working.
the radio died from a short circuit in the beginning
I’ve noticed there’s no voltage on middle pin of rx transistor but tx side works fine.
Could it need modifications to work with this cpu?
I fitted a dpt295042z
everything works except there is no speaker sound
Or receive
all the connections are numbered the same but the new board doesn’t have echip only jumper to wideband it which is working.
the radio died from a short circuit in the beginning
I’ve noticed there’s no voltage on middle pin of rx transistor but tx side works fine.
Could it need modifications to work with this cpu?