You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
I need to know what is the stock dead key on low setting for RCI-2990 / galaxy saturn turbo
I know the high setting is 50 watts swing to 150. What is low?
Thanks
Low power carrier setting on these radios is 10 watts. Problem is the lower the carrier the more negative peak cutoff you're going to get because of the low output voltage from the series pass modulator.
It gets so bad around or below the optimum carrier range of 25 watts that you can't approach 100% positive peaks before RF cutoff. An improvement can be seen adding a 10 ohm resistor between the driver and final. This is outlined in another tread in this category.
Low power carrier setting on these radios is 10 watts. Problem is the lower the carrier the more negative peak cutoff you're going to get because of the low output voltage from the series pass modulator.
It gets so bad around or below the optimum carrier range of 25 watts that you can't approach 100% positive peaks before RF cutoff. An improvement can be seen adding a 10 ohm resistor between the driver and final. This is outlined in another tread in this category.
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.