Sidebar Sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Re: help for buddygunzz's 2510 problem

THe manual shows then as MV1YHS,

or MV-1YH-S

Uniden PN: BDFY0058001 (Varistor)



I think in Galaxy radios they use 1n4148's.. and for the MRF455 mod I have used 1N4001's.



I do not know of a 'Tried and True' substitute for it.



In the new Lincoln's they us a Surface Mount transistor as the Bias Diode (use 2 of the 3 leads)

Also in later 2510's they used similar Surface mounted Transistors on a Small PCB with 2 leads much like the older ones. (in size and fit)



Anyone have success with a replacement??



We all would like to know..

Roger




</p>
 
Please let me know what you have for Each Bias reading:



Mode:USB No Mod.



Remove the B002(PB-100) from the Main PCB.

Connect a DC Ammeter (+) to TP4, (-) to TP3.

Adjust VR112 for 50mA reading on the DC Ammeter.



Connect a DC Ammeter (+) to TP4, (-) to TP2.

Adjust VR113 for 50 mA reading on DC Ammeter.



Roger




</p>
 
Please let me know what you have for Each Bias reading:



Mode:USB No Mod.



Remove the B002(PB-100) from the Main PCB.

Connect a DC Ammeter (+) to TP4, (-) to TP3.

Adjust VR112 for 50mA reading on the DC Ammeter.



Connect a DC Ammeter (+) to TP4, (-) to TP2.

Adjust VR113 for 50 mA reading on DC Ammeter.



Roger




</p>
 
<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/happy.gif ALT=":D"> <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/laugh.gif ALT=":lol"> <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/wink.gif ALT=";)"> <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/grin.gif ALT=" >D"> <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/tongue.gif ALT=":p"> <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/roll.gif ALT=":rollin"> <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/smile.gif ALT=":)"> <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/pimp.gif ALT=":hat"> <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/happy.gif ALT=":D"> <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/happy.gif ALT=":D"> !



Always glad to help!


</p>
 
<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/happy.gif ALT=":D"> <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/laugh.gif ALT=":lol"> <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/wink.gif ALT=";)"> <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/grin.gif ALT=" >D"> <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/tongue.gif ALT=":p"> <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/roll.gif ALT=":rollin"> <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/smile.gif ALT=":)"> <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/pimp.gif ALT=":hat"> <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/happy.gif ALT=":D"> <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/happy.gif ALT=":D"> !



Always glad to help!


</p>
 

dxChat
Help Users
  • No one is chatting at the moment.


      Top Bottom
      Back