Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Reflector Element Length

Ok, thanks guys I will do the reflector change first then make a check. If that doesn't work I'll try the driver suggestion. will let you know how it work out.
 
hi guys SB here, I tried lengthening the reflector element to 18' 8" as VKrules suggested and I got a swr of 1.3 over the band so I can live with that. Thanks guys for all the great information .
 
Hi VKrules don't have a antenna analyzer to check f to b. checked swr with Dosey meter, but already talked to Texas at 7 feet off the ground
 
No mate Front to back ratio. point the beam at a station then 180 away If all is well you should see 2 to 4 s points difference. Of course 7 ft off the ground will effect results, Swr will change as well as you raise it.
 
  • Like
Reactions: 1 person

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom