• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
V
Reaction score
542

Joined
Last seen

Profile posts Latest activity Postings Media Albums About

  • silly question, im trying to dial in swr .... do i check swr with linear on or off .... flat swr without linear on .... higher with linear off , which is the true swr....
    V
    vkrules
    SWR taken after the amp should not vary with high power. If the swr goes high you have a problem . Like spurious emissions from your amp caused by over driving or poor design. Another issue , with CB amps, lack of input tuning you can see that with the swr meter between the radio and Amp. After saying that a slight change on high power is nothing to worry about.
    Regards Mark
    Thanks vk. I will be opening the amp. I'm gonna tighten down every screw and I would also like to use the glue or laqour as per you suggestion. Can you tell me what type of glue or lackqour I should purchase? Do you prefer one over The other and exactly how should I apply it and how long should I let it dry before i use the amp? Thank you very much . Your friend Christopher.
    Hi vkrules! The menu list of my Maxlog M-8900 does not match the list in the owner's manual given by Mike from Yeticomm. I cannot find all the settings proper as the menu numbers do not match and the abbreviations do not make a whole lot of sense with the miss-match of the numbers.
    Do you have a better menu list for mine? There are 25 menu items on the radio...

    73 Rod aka mechanic
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…