Yes I have a RFX-150 and it is missing D6 was wandering if anybody knew what I could use as a replacement. I have a lot of regular size diodes if I could use one in place of smd component. Thanks for any help or info!
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
RFX-150
- Thread starter 88_bandit
- Start date
what is printed on D5? It will be the same as D6... I can't make it out. Knowing that you can look up the SMD value.
BUT
It looks like its a 1N4148 as part of the EKL mosfet companion part EN1230 which uses a (smd471)470ohm resistor and a (smd332)3.3K resistor and a 1n4148 diode.
You'll notice the same parts on each side of the 2 mosfets.
BUT
It looks like its a 1N4148 as part of the EKL mosfet companion part EN1230 which uses a (smd471)470ohm resistor and a (smd332)3.3K resistor and a 1n4148 diode.
You'll notice the same parts on each side of the 2 mosfets.
Last edited:
Yes you can use a regular sized 1N4148.
On D6 the banded end goes to the left.
On D5 the banded end goes to the right.
D5 SMD should have a band on it facing to the right. I think I can see it but don't worry if it don't.
On D6 the banded end goes to the left.
On D5 the banded end goes to the right.
D5 SMD should have a band on it facing to the right. I think I can see it but don't worry if it don't.