• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

RM203 and Anytone 6666??

CB590

W9WDX Member
Jun 29, 2016
1,545
1,266
173
Trenton Nj
www.590dx.com
Anyone run one with just Sideband..

Obviously AM would cook it..

My Quad 6 on lowest power does about 18w pep on SSB with a real 2 tone input..

The RM203 is rated to 20w..

My voice peaks on low are for the most part 12-14w on my meter.. whistle gets me to 18-19w.

SWR is like 1:2:1 or less on Ch38..

I have a 203 here, so I figured I'd ask first..
 

I hear a call for help in the future for repair help. Leave the 203 on the shelf and when you find a cb that needs a little boost hook it up.
The drive requirements listed will cook the 203 in short order.
No more than 2 watts dead key, and no more than 12 watts pep on ssb.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.