• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Robyn SB-520 low AM modulation

Lkaskel

Well-Known Member
I Support WorldwideDX.com!
Aug 4, 2017
541
439
73
61
Hey Everyone,
So I have this SB-520 that I talk on once in a while on SSB and it sounds terrific. I have not talked on AM in a few years but someone was local and asked me to jump on. The modulation was very low. Around 30%. I tried a few mics and nothing hepled. I put it on the bench and VR7 (mic gain) does not affect it at all. The radio does not have any mods and if the limiter was clipped I think it would drive it over 100%, right? Any thoughts?

Thanks as always!!
 

Just a wild guess, but could it be a bad 48 year-old electrolytic cap? Or maybe even two of them? Or they might all still be good.

VR7 is the AM modulation limiter. If the mike gain is too low for it to kick in, you'll see no change from it. VR6 is the mike gain. Try that.

73
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ Hambones amps:
    Does anyone know if you can replace the 2290 in a galaxy dx 93t twin turbine with a 2sc2879 red dot? If so, what would have to be tuned?
  • @ ShadowDelaware:
    Hambones the entire amp section would have to be retuned, and the rf transformers re wrapped.