I am rebuilding an SB220. Harbach Electronics has been out of its parasitic suppressor kit for some time now. Anybody know of anyone else who makes this suppressor or has plans so I could build my own?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
SB220
- Thread starter tubegearcollector
- Start date
I used some 1/2" brass strips and built my own parasitic choke. I used 2 100ohm, 3W metal oxide and ran in parallel. Then made a horseshoe so to speak and made it about 2" long. About an inch apart spacing so you can fit resistors between ends. Seemed to work great for me.
dxChat
- No one is chatting at the moment.
-
-
@ heartbreaker3473:Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
-
@ AudioShockwav:Wes, it's better if you start a thread on the main forum, more people are going to see your question.
-
-
@ heartbreaker3473:I put it in the general disscution help area and started a new thread. Thank you for letting me know.