I am rebuilding an SB220. Harbach Electronics has been out of its parasitic suppressor kit for some time now. Anybody know of anyone else who makes this suppressor or has plans so I could build my own?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!
SB220
- Thread starter tubegearcollector
- Start date
I used some 1/2" brass strips and built my own parasitic choke. I used 2 100ohm, 3W metal oxide and ran in parallel. Then made a horseshoe so to speak and made it about 2" long. About an inch apart spacing so you can fit resistors between ends. Seemed to work great for me.
dxChat
- No one is chatting at the moment.
-
dxBot:brandon7861 has left the room.
-
-
-
-
@ boniface95:Hi there, I just posted this question, if anyone has time to check it out, i'd really appreciate some feedback. https://www.worldwidedx.com/threads...-radio-transmitters-in-the-same-space.270736/