• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

service menu: increase output power ssb CRT 7900v turbo

Emir999

New Member
May 18, 2025
3
1
3
60
service menu: increase output power ssb CRT 7900v turbo

Can someone tell me which parameters of the service menu I should change to increase the output power in ssb of my CRT 7900v turbo?
I would need the correct values to enter.
Thanks
°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
menù di servizio: aumento potenza di uscita ssb CRT 7900v turbo

Qualcuno mi saprebbe indicare quali parametri del menù di servizio dovrei modificare per aumentare la potenza di uscita in ssb del mio CRT 7900v turbo?
Miservirebbero i valori corretti da immettere.
Grazie
 

I know which parameter to adjust as I did it on mine. I'm not going to give that info out here though because..........
1) You risk bricking the radio messing with the service menu, and
2) You can only get about another 10 or 15 watts out at most, so it is not worth the time to do it.

If you really want to go ahead the info is out there in the wild on the internet.....that's where I found out how to do it. YMMV.
 
  • Like
Reactions: Brother DXer

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.