I am looking for a connection diagram for a Kenwood TS-930S and a Tigertronics Signalink. I have not found any information as to how to do this or if it can work? I have seen interface cables but nothing that says it works with the TS-930. thanks in advance for any help.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!
SignaLink connections with Kenwood TS-930S
- Thread starter MJGRX
- Start date
Found this link.
Signalink wiring for Kenwood Mobile/Base
As long as you got the cable, it should work for yours 930S. Wire the signalink as it shows on the website.
Greetings to all - I just came across this Forum and look forward to chatting with you all.
Concerning the SignaLink issue - you should note that TigerTronics produces pre-made jumper blocks for all different radios. They are inexpensive and much simpler than setting jumpers manually. Additionally they allow a lot of flexibility to switch the box from radio to radio without messing with the jumper wires.
73 and good luck! See you on the digital bands!
Concerning the SignaLink issue - you should note that TigerTronics produces pre-made jumper blocks for all different radios. They are inexpensive and much simpler than setting jumpers manually. Additionally they allow a lot of flexibility to switch the box from radio to radio without messing with the jumper wires.
73 and good luck! See you on the digital bands!
The Signalink is a sound card interface. It will work with pretty much anything. audio in/out and PTT.