Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Silver K Eagle

C

CBC544

Member
Apr 2, 2008
13
6
13
Silver k eagle audio in mic works fine. Ets tones not working while board is installed in mic. Unmount board from mic and tones work fine at first I thought there was something wrong with the board so I took another board out of my other k eagle and it does exactly the same thing I’m thinking some kind of ground issue but I cannot figure it out. Any help would be greatly appreciated
 

Sure sounds like a crack in a foil trace or a failed solder connection. Might try flexing the pc board slightly while it's out of the mike. I suspect what causes the difference is mechanical in nature, and tightening the screws causes the board to flex just enough to cause the fault.

73
 
  • Like
Reactions: SuicideRide

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom