Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Smaller bracket maker?

Limeybastard

Limeybastard

Active Member
May 29, 2017
725
120
43
55
Shady Hills Massive, FL.
Was just wondering, does anyone make smaller brackets for the galaxy 979 radio? I believe they are the same ones used for cobra 129 also. Just need the height to be less so that i have better leg room
since its mounted under my steering footwell area , thanks
 

Make your own.
1237376_584822281574047_714231146_o_zpslq1lrcqw.jpg

798405_584822211574054_1178959133_o_zps1ounyn3t.jpg
 
  • Like
Reactions: Limeybastard
Or, modify the existing bracket to suit your needs. It's just a matter of drilling new holes, and maybe a little trimming. And, a little bit of touch up paint, if you're particularly concerned with appearance.

You'd have that bracket done faster than it would take to go get a new one; certainly faster than waiting on one to be delivered.
 
  • Like
Reactions: rabbiporkchop and Limeybastard

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom