• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

SommerKamp ts-2000Dx


I also have one of those rigs its an outstanding little radio!!! I like the original mic it has the better cord on it and the dimmer for the display has 4 brightness settings instead of 3 and the radio is rock solid on SSB. The power cords are availavble anywhere that sells CB radio and supplies. Its a standard 3 pin. I have about 50 of those power cords with 10-15 still being brandnew in the package so you shouldnt have a problem finding one yourself.
 
Same rig as an old Ranger 2950 (RCI)....should be easy to find...
bought one of those few years back still in the box for $125.USD at a HAMFEST....run it mobile on 10m...worked the world on those 25w SSB
Enjoy
All the Best
BJ
KW2000 Power Cord - For Hi-Power Galaxy, Ranger, Connex & Supers CB Radios, Stryker Radios, CB Radio Antennas and Accessories - Experienced CB Technicians at WalcottCB.com


Wrong cord, the TS2000DX takes a standard 3 pin cord:

$(KGrHqYOKiwE6bb+REs)BO)VV4bSuw~~60_58.JPG
 
  • Like
Reactions: 1 person
well thanks for the response guys, does anybody know where to find 1 ?

Any CB shop or truckstop should have them, hell even Radio Shack (in my area) carries them.If you can't find one local, let me know and I'll send you one.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.