Stryker 955/655 V2 NPC mod?

[FredTx63]

Anyone have the NPC mod for the V2 Stryker 955/655 radios?

 

[Shadetree Mechanic]

Does it need an NPC mod? Mine swings to peak from any carrier level. Might be able to increase the modulaton in the service menu.

 

[FredTx63]

I have one on the way - so was asking in advance of it arriving. V1s certainly didn't act like you're describing. Good to know. I am aware of the menu based adjustments on the v2. Thanks

 

[Greg T]

I have one on the way - so was asking in advance of it arriving. V1s certainly didn't act like you're describing. Good to know. I am aware of the menu based adjustments on the v2. Thanks

They do if you set them up right. For my V1, I have it set to limit the swing to 35W while maintaining a 1 to 2W carrier. But, they are able to swing full output if you want. The V2 even more so.

 

[sp5it]

The same way like older version,

 

[BlueBeam]

I wrote about it in the Anytone 5555 Plus page. I posted a pic of the NPC mod I developed for this chassis.
I use rack gear on my 5555 plus and it turned out great with the NPC mod. Check it out.
You must be able to solder very very good to pull this mod off!