lords
Active Member
ya make sure you turn the dial all the way down.. when its set on FWD set,before you key up.so you don't pin the needle!
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
SWR any reason to worry??
- Thread starter Chainsawgang
- Start date
Oh Come on guys , give me more credit than that ! I re-calibrate the meter with EVERY SWR check . And it is still in the red, not as high as when measured behind the Boomer. But, still in the red. Any ideas ?? I have considered trying a new different length jumper - maybe 6 or 9 foot?
sometimes, just a jumper change will do the trick. try the 6 an a 9 an go from there. I have had to do that.
Just my .02
Just my .02
dxChat
- No one is chatting at the moment.
-
-
-
-
@ AudioShockwav:Try starting a new thread in the Amplifier section and asking the question, more people will see it to respond.
-