You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Are tube amps like the KLV1000 affected by higher SWRs lets say 1.4:1 to 1.8:1 range or will they handle SWRs in that range. I know on my transister amp the manual says to keep my SWRs below 1.3:1 to use the amp.
In general, tube amps are much less sensitive to higher SWR conditions than transistor amps are. I don't know that amp specifically, but I would say that anything under 2:1 isn't something to be concerned about.
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.