• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Tram D201


Typical method is to rewire it so the VFO will run the transmitter. The only way they could get the radio approved for legal sale was to wire the slider for receive ONLY.

The slider will cover a few channels below, and up to around channel 57.

73
 
nomadradio said:
Typical method is to rewire it so the VFO will run the transmitter. The only way they could get the radio approved for legal sale was to wire the slider for receive ONLY.

The slider will cover a few channels below, and up to around channel 57.

73

And if you go this route, stick a couple muffin fans on the rear of the unit, to keep that VFO drift down.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ COWBOYS:
    Denton GL 1000 ham amp comes on, but will not key up
  • @ COWBOYS:
    What can I do to make my Denton GLS 1000 amp to load ?
  • @ AudioShockwav:
    Try starting a new thread in the Amplifier section and asking the question, more people will see it to respond.
  • @ iw7ed:
    hello