Uniden 980 no modulation

[jetman]

I have TX power, but no modulation. Swapped mics, I do have audio on PA and hear myself with talkback, but nothing on Mod meter nor can I hear myself on test radio. SSB works fine. Normal RX on 980. There's really nothing on this radio out there. Anyone know where I can get a schematic or has anyone had this problem before???
Surface mount tech is really a pain in the a$$ if you ask me. But I can't locate anything!!!! SOOOO SMALL!!!!!

 

[sonoma]

no schematic for this radio out so you will hve to find some one that has had the problem that might have an idea.

 

[jetman]

Yeah, I took it to a seasoned Tech but he couldn't help me. Not with surface mount technology.

 

[sonoma]

this radio comes with a 2 year warranty. contact uniden and see if it still has the warranty time left on it. if you have the receipt will tell you for sure what is left.

 

[IMD262]

this radio comes with a 2 year warranty. contact uniden and see if it still has the warranty time left on it. if you have the receipt will tell you for sure what is left.

^ This is your best bet as long as you haven't been inside it.

 

[psycho]

SMT was the beginning of the end for CB radios......plus manufactured in china makes it even worse.

 

[Diesel2650]

New radio? New to you radio? Used to work but dont no more? If its new warranty it. Somewheres on here is a post with a pic road map of the board. AMC might b turned all the way down, they turn 360* and never stop so easy to turn past max to none n back again. Found it, not on here but heres the map http://www.cbradioclub.com/forum/radios/8759-uniden-bearcat-980-ssb.html?start=8

 

[9C1Driver]

I agree, time for a warranty repair on the SMT radio. No reason to mess with it yourself unless you know WTF you are doing with SMT.