• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Uniden Bearcat BC980

Got it in yesterday and installed it. The options are gonna take getting used to as well as that beep. With the mic gain all the way up it DKs about 3.5w and carries about 7.5w. The RF Gain is lacking IMO. The ssb is not great either. I could do better chasing my Galaxy. The freq. readout needs another decimal. I'll need to tweak the output for a decent ratio. It picks up more engine noise than the other radio I had in this truck.

Give it time. It is different.

You should do a compaireson between 980 and dx959 :thumbup:
 
Your point?

So where the US Olympic teams uniforms, but they were made/built to the specs requested by the US company that outsource those jobs. I've been to China, there is no shortage of skilled craftsmanship there but the manufactures are only going to build a radio, uniform, car, etc as good as they are contracted to build.
 
So where the US Olympic teams uniforms, but they were made/built to the specs requested by the US company that outsource those jobs. I've been to China, there is no shortage of skilled craftsmanship there but the manufactures are only going to build a radio, uniform, car, etc as good as they are contracted to build.

Its very disrespectful of rich men to vote out for our U.S OLYMPIC team to wear made in china uniforms. So many Americans would have loved to take the job rather than another country.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.