You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
A Winner has been chosen for the 2026 July 4th Retevis RA89R Giveaway! Click Here to see who won!
Found this in my parts selection. I don't know if it's a specific radio part or an aftermarket item. Almost looks like some sort of channel board, but I'm just guessing. I have no information or paperwork I can find.
Kind of looks like a signal generator for a sideband radio. If you triple the crystal frequencies you'll get about a 3kc offset between them in the 33 MHz range. No idea what radio it would be out of, though.
By looking at the CBC International crystal mixing chart, various 12 Mhz crystals will produce higher channels and above frequencies in a SBE Console II plus a few others. In that case, a 12.320 Mhz crystal will produce 27.585 Mhz on Channel 1.
I also seem to recall 12 Mhz crystals being used some old 2 meter radios. Repeater offset?
More clues…. Thinking back, many J C Penny radios used those connectors, and the 681-6241 (981-8360) model employed those same two 12 Mhz crystal pairs.
You usually don’t see two different crystal brands in the same circuit. By looking at the solder joints, that probably was an attempt at a repair job.
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.