Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Use Kenwood MC-60A mic on Alinco DR-135T 2m

G

GR599

New Member
Feb 11, 2023
1
0
1
77
Has anyone used a Kenwood MC-60A desk mic with a Alinco DR-135T 2m transceiver? I am wondering what kind of modification needs to be done to the mic or mic pinout. Thanks!
 

ALINCO DMR610 DR-135 DR-435.



PIN 1 MIC
PIN 2 PTT
PIN 3 DOWN
PIN 4 UP
PIN 5 +5 VOLTS
PIN 6 REMOTE CONTROL
PIN 7 SCREEN EARTH (ground)
PIN 8 GND


8mini.jpg

Mike wiring
Not a combination I am familiar with but all information from the linked website above. Use at your own risk.

73
David
 

Attachments

  • mc60a.jpg
    mc60a.jpg
    81.8 KB · Views: 442

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom