Two questions; does anyone have the wiring code for a Cherokee-1000 C.B.,i mean the actual radio mic plug pin functions,also i would like to know the VR pot numbers for power and modulaation on the Galaxy 2547? TNX. Warlock35po.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
The Winners of the three Retevis radios 16 Anniversary giveaway are announced!! Click Here to find out if you won!
VR Adjustments and mic. wiring code
- Thread starter Warlock35po
- Start date
ButtFuzz
Anti-BS Advocate ● WO0WOO ● Reverend Doctor
The Microphone Wiring for the CBS-1000, Eagle Tomahawk and Magnum 257 are the same:
Pin 1: Mic Audio
Pin 2: Receive
Pin 3: Transmit
Pin 4: Down (up w 22K Ohm Resistor)
Pin 5: Ground
Pin 6: +13.8 VDC
CAREFUL! Some of these units such as the Magnum have + 13.8 VDC on Pin 6. With no current limiting, of course. This means you get a screwdriver in there or your pointy knife and short that lead and some critical part of your radio goes up in smoke right quick like...
Galaxy DX2547:
AM High Power VR14
AM Low Power VR18
SSB APC VR17
SSB ALC VR13
AM Modulation VR16
Pin 1: Mic Audio
Pin 2: Receive
Pin 3: Transmit
Pin 4: Down (up w 22K Ohm Resistor)
Pin 5: Ground
Pin 6: +13.8 VDC
CAREFUL! Some of these units such as the Magnum have + 13.8 VDC on Pin 6. With no current limiting, of course. This means you get a screwdriver in there or your pointy knife and short that lead and some critical part of your radio goes up in smoke right quick like...
Galaxy DX2547:
AM High Power VR14
AM Low Power VR18
SSB APC VR17
SSB ALC VR13
AM Modulation VR16
VR's andMic pins function info information.
Thanks for info ButtFuzz, much appreciated, Keepit real. Warlock35po
Thanks for info ButtFuzz, much appreciated, Keepit real. Warlock35po