Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Wilson 5K roofmount,wimpy coax!

D

dxing440

Active Member
Apr 10, 2011
161
10
28
I run a magnum S45Hp, a DX500V,and a wilson 5k magmount. Used it a few weeks, the mag started discoloring the paint on the top of the truck.
So I ordered a roof mount kit w/coax for the Wilson 5k. It came with RG58 (skinny cable).
Question is, is this coax big enough for 500-600 watts?
 

oh heck yeah ,i ran a 12 pill thru mine .mind you i am not long winded but i keyed that sucker at a kw already and never melted the coax .you will be fine .
 
Its easy enough to solder a new piece of coax onto the roof mount.

I pulled my roof mount from one install to put into another car, simply bought a pre-made piece of coax, snipped one end off and soldered it onto the mount.

I have ran a 2-pill, 1x2, 4-pill, an old beat and tired 6-pill, and a 1x4 though the OE Wilson coax without any issue.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom