Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

WSJTX and FAkE IT

A

ahasverus

Member
Dec 2, 2011
74
3
18
When I put in the settings Rig :none everything works but no possible to set fake it
when i try to use in the settings rig: yaesu 1200dx possible to set "fake it" but nothing works
can i use that rig and what about the settings
thank you for advice on3bm
 

Do you really need to use split? If you're just doing casual FT8, you don't need split. If you're contesting, then you probably need it. I don't have that rig, so I can't comment on the right setting for it.
 
Yes, you must use split (or fake it) to don't transmit on filter edges.
@on3bm set "fake it" in software. Than set red cursor on 3000 and press TUNE.
You should see freq on display changing on TX.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom