• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

yaesu ft 401b

Radio Tech

Radio Operator
Sep 9, 2008
858
312
173
64
North Carolina
www.gokarters.com
Just wanted to know if many here have worked on these old rigs. got one in the shop here and it hs been a long time since i had one on the bench. Luckly i do have the full manual. From what i read there was never a service manual. and there is little info on the net.

Unit has no output but does produce a signal. Also s meter pins in receive mode. However the rig does receive fairly well. Any info or tips would be appreciated,
So many tubes in this radio :D
 
Last edited:

I know what you mean. I am at work today. Been here since 4am.
Yep. I has those tubes. Need to find screen and bias resistors and start there. Right after i scope the driver. I do have that site plus another. Not much out there on this rig.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.