-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!
Yaesu radio repair locations?
- Thread starter 9C1Driver
- Start date
Being out of warranty you free to send it anywhere.
I use this guy in the link below. I used him a couple times and he's done me right. I had a mobile HF amp that I thought I blew, turned out it was an internal fuse I didn't bother to open up and check. He could have easily taken advantage of me but the called me and told me what it was and I was relieved it was only a simple fuse and nothing more.
He is in San Antonio Tx though.
You can check out EHam.net and go to reviews and the top of the review list is the Ham radio repair guys with their contact info. There are some Yaesu repair guys listed too.
I use this guy in the link below. I used him a couple times and he's done me right. I had a mobile HF amp that I thought I blew, turned out it was an internal fuse I didn't bother to open up and check. He could have easily taken advantage of me but the called me and told me what it was and I was relieved it was only a simple fuse and nothing more.
He is in San Antonio Tx though.
Ham Radio Repair | HamRepair.com | Professional Amateur Radio Repair
Ham Radio repair of all major brands and models
www.hamrepair.com
You can check out EHam.net and go to reviews and the top of the review list is the Ham radio repair guys with their contact info. There are some Yaesu repair guys listed too.
Cal at hamrepair.com does great work & his rates are Very Good as well. I have used his services several times as have friends of mine.
W4KVW
I am in Indiana and was talking with some locals on 36 lsb, there were some storms moving into the area. I was keyed up and talking when I noticed I had no output. Switched over to a dummy load still nothing. Checked a 2m repeater and a station got right back to me.
The next day I tested further, 10 and 11m output was maybe 20 watts, the 2m 70cm side worked fine. Tried a master reset with the same problem. That’s pretty much it.
The next day I tested further, 10 and 11m output was maybe 20 watts, the 2m 70cm side worked fine. Tried a master reset with the same problem. That’s pretty much it.
Radio is back and working fine. Needed new finals and then just a general check over. I am happy with the overall service from this shop.
Sounds like that shop took care of you. He's been good with me and some others who also mentioned him on this thread.
Always good to get the radio back!
Always good to get the radio back!
Yes the radio is working as good as ever. Thanks guys for the recommendation and comments about hamrepair.com , I’m very happy with them.