Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Zetron Model 48

K

kd0fx

W9WDX Amateur Radio Club Member
Aug 16, 2009
160
2
28
EN10bt
I took posession of a 70cm repeater box that has been sitting in the garage of the local club for some time. It looks like the controller is a Zetron Model 48 (running a couple of GM300's). I've been to repeater builder and got some manuals but I'm trying to find the terminal software so I can connect to and program it. From what I can tell in the manual it is called DT.COM. Can't find it. Anyone know anything about it?
Looks like I'll need a DOS computer to run it though :ohmy:
 

If it's truly just a serial terminal program needed to connect, just about any windows terminal application will work?
 
I can try it out - no harm trying. I suppose putty would work if anything will.

Sent from my YP-G1 using Tapatalk
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom