Thought this may be of interest to the weekend twiddler or the experienced engineer. Kind of fits both camps as the device is certainly used by both either for quick and dirty or all they have scenarios.
There has been previous attempts at making a community/ homebrew firmware for these devices but none as far as I'm aware have gone as far as the current development of new firmware for these products. This has legs and really does seem to be offering a real alternative to the Stock Firmware and elimination of bugs and addition of features not present in the Stock Firmware.
The product page for the device is > Here
The newest stock firmware is found > Here
The NEW community firmware OpenOSC can be tracked from this post onwards on EEVBlog > Here
The Development work being carried out for OpenOSC can be found along with the latest releases > Here
One of the best things is it can now be streamed to your PC:
USB and remote control
Thought this might be of some interest to the community here.
Some screen grabs from the developer captured on a ZT703S running OpenOSC.
There has been previous attempts at making a community/ homebrew firmware for these devices but none as far as I'm aware have gone as far as the current development of new firmware for these products. This has legs and really does seem to be offering a real alternative to the Stock Firmware and elimination of bugs and addition of features not present in the Stock Firmware.
The product page for the device is > Here
The newest stock firmware is found > Here
The NEW community firmware OpenOSC can be tracked from this post onwards on EEVBlog > Here
The Development work being carried out for OpenOSC can be found along with the latest releases > Here
One of the best things is it can now be streamed to your PC:
USB and remote control
- USBTMC and CDC (virtual COM port) with SCPI commands, working alongside the local UI
- Compatible command profiles for Rigol DS oscilloscopes and the OWON XDM1041 multimeter, so existing PC software such as ngscopeclient can talk to the device
- USB Remote mode: the PC controls the device while the screen keeps showing live data
- USB data works only in the 200/100 performance profile. Connect directly to a PC port: disconnects are known, especially through USB hubs.
Thought this might be of some interest to the community here.
Some screen grabs from the developer captured on a ZT703S running OpenOSC.