-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Latest activity
-
DDanzik replied to the thread CPI 2000 issues.I now can get some signals off of it but I am at .5 micro seconds on the sweep time/ div this is pin 11 on the ic I replaced
-
-
Shadetree Mechanic reacted to fourstringburn's post in the thread Rg316 or Rg400 1' jumpers with
Like.
I use RG8(not rg8x) for jumpers. RG8 is nice and flexible for jumpers and because I use solder crimp connectors, the larger coax makes a... -
DDanzik replied to the thread CPI 2000 issues.Hi, Thanks for your reply, I have adjusted just about everything on this scope when it comes to getting a waveform from the radio and...
-
-
DDanzik replied to the thread CPI 2000 issues.Hi Nomad thanks for the reply, I think you were correct about the age of the scope though and I do not think it is operating properly. I...
-
-
DThe dot scans from left to right at a rate that makes audio signals legible. An RF waveform naturally moves up and down way too fast to...
-
YHey gang! I recently won the Radioddity QT-80 right here on the Worldwidedx.com Radio Forum! I received the rig today, and was able to...
-
99633 replied to the thread Any channel plan for FM?.Impressive.!
-
9I think it was about two years ago when Brother DXer and his local radio community would hang out on FM 30. I hooked up my 40 channel...
-
Rick330man replied to the thread Any channel plan for FM?.I think it was about two years ago when Brother DXer and his local radio community would hang out on FM 30. I hooked up my 40 channel... -
You should be able to get there, don't forget the channel arrangement is slightly mixed up in the original 23 channel frequency... -
9You should be able to get there, don't forget the channel arrangement is slightly mixed up in the original 23 channel frequency...
-
AudioShockwav replied to the thread Any channel plan for FM?.You should be able to get there, don't forget the channel arrangement is slightly mixed up in the original 23 channel frequency... -
99633 replied to the thread Any channel plan for FM?.Thanks for that tip! I will give it a try. My RCI's never did that as I recall.
-
9That's weird. 26805 is Band C channel 23 on pretty much all export radios. On some radios you need to use the +10KHz switch to get to...
-
BC Coyote replied to the thread Any channel plan for FM?.That's weird. 26805 is Band C channel 23 on pretty much all export radios. On some radios you need to use the +10KHz switch to get to...
