I am a newcomer to worldwidedx.
I received a used power supply as a gift from a friend and I turned it on and tested the voltage and it was around 13v I connected my radio and noticed a slight squeal while transmitting for a radio check I also noticed the meter on the power supply stopped moving. So I disconnected the radio and tested the voltage again this time it was at 24v yikes. My question is how would I track down which component (s) would most likely be damaged? My radio hr2510 receives well but tx is down to less than 1w.
I received a used power supply as a gift from a friend and I turned it on and tested the voltage and it was around 13v I connected my radio and noticed a slight squeal while transmitting for a radio check I also noticed the meter on the power supply stopped moving. So I disconnected the radio and tested the voltage again this time it was at 24v yikes. My question is how would I track down which component (s) would most likely be damaged? My radio hr2510 receives well but tx is down to less than 1w.