Patching up a Mega Watt S700-12.

[MKwrench]

My "new to me" power supply suddenly and violently poped it's fuse, I'm assumung from some sort of surge, because the same setup operates just fine on another power supply. When the fuse popped it created a bright flash like a quick welding arc, so its a good short. I just began testing across "Line" and "Neutral" until I came to the 2 switching fets in the back, they both tested as resistors.
When I replace these is there anything else I should look for, or just replace for peace of mind?
These are obsolete and Google has recomended something different each time I asked... LOL
Here are some pics of suspect parts removed for testing.

 

[nomadradio]

When I replace these is there anything else I should look for,

It's all about the specs. If a replacement's data looks similar the failed one, you're good to go. Odds are you'll find specs at alldatasheet.com.

73

 

[brandon7861]

mouser and digikey both have the datasheet, both show it as obsolete, and both offer the ability to search for similar parts. Digikey will suggest parts directly and mouser wants you to check the parameters you want to match before suggesting parts. The part number of these mosfets tells some too (if you ever can't find the datasheet). 40N50. 40 is the current rating, N is the mosfet type and 50 (*100) is the voltage rating. So 40N50 is a 40A 500V N-channel mosfet.

https://www.onsemi.com/pdf/datasheet/fql40n50-d.pdf

IXFK80N50P may be an option.