You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
It was wired correctly!!! The switch was just far enough out of adjustment that it was not completely un keying enough to open the receive circut. Kirk
I wired an Astatic Silver Eagle Mic to a fourth generation Madison, the one with the digital clock and 8719 PLL as follows. There is no audio! I checked to make sure there is no short and didn't find any. Where do I go from here? Did i wire it correctly?
Pin #1 ~ White
Pin #2 ~ Shield...
The VGS-1 just plugs in under the cover that has two screws that is located under the battery. Here is where I need the help. There is an assortment of little clips and foam cushions with the VGS-1 to properly secure it in the NX200. Anyone have access to Kenwood instructions showing proper...
Radio arrived as advertised, nice and fully functional. What got me fire up was the US Post Offices tracking or should I say lack there off!!!! Then my local postman told me the item was never sent. I trusted the post office and shouldn't have! I only had the radio temporarily connected to a...
He replied. He said he shipped the day after he received payment, that is consistent with what showed up on fleabay. I'll give it some more time. What got me fired up was tracking said arrival date 8-21 after mail ran on the 22 I went to the post office and had them check. They told me it hadn't...
His rating is 100%. I sent him the following message and haven't heard anything yet. I guess we will see.
I took the tracking # you furnished to my post office to see why I have not recieved the radio! They said you printed a shipping label but have not shipped the radio yet! Whats up? I paid...
I placed a winning bid on a Uniden Madison on 8-13-12 from ebayer name
hotdogrelish I paid with PayPal as soon as the sale ended. The next morning the item was marked shipped and gave a tracking # with estimated delivery 8-21-12. Today the 22nd I went to the post office and ask them to track the...
I still have my original Penetrator 500 from the 1970's I hope to rebuild it soon I've learned there is a fella named Jim Dent calls his business Outlaws Antennas he not only restores the old Penetrator 500 but will sell you the parts you need to do the work yourself. He has direct replacement...
I had the same problem. Even called Wilson. The problem was poor connection on the coax. Make sure the outer portion of the cable is slid onto the connector good.
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.