Recent content by Klint

I know a lot of people prefer the 500 over the 667, but since my 29 is really not driving that much , therefore is the reason I went with 667. I figured I could get more with the 667 since it has a driver built in.

Thanks

No doubt about that, I’m driving it with a cobra 29 that has been peeked and tuned. DK is around 2 watts, swings around 10 or 12. Ive been told to keep the variable pot wide open to keep it from burning itself out. What do you think ?

Well just a follow up..... I got out there this morning and traced my power wire and to my forgetfulness . I had added a 30 amp inline fuse that was tucked away and hard to see and... wa....laaa...there it was a blown 30 amp. I just knew I had component go out when I checked the two 35 amp fuses...

Will do, thanks

Will look into that. It’s been where it is and working great for about a year. I will probably take it out this weekend and check it. Thanks

Was using it the other night and it was working fine then all of a sudden it went out like you cut a switch off. Wasn’t using it long either, it was on maybe a minute or less before No lights , no relay clicking, no meter moving on its readout, nothing. It has 2 35 amp fuses, checked those with...

I’ll tell y’all something else too, a good friend of mine has a cobra 29 lx for about a year now and his stock mic is cutting out as well. Mine is a 29 classic. I guess I’ll open it up and look into it a little later, we are getting ready for some bad weather over here in central Alabama.

Thanks guys for your help. It’s just peculiar that the first mic that came with radio started doing that and that is why I have bought the second cobra mic hg-m73 this time. Seems to be having same issue. Just bought it 1st of feb this year. Maybe it’s something I’m doing to em.. lol what’s the...

When i key the mic, i can see the carrier raise, but sometimes when i talk it wont modulate,nor can i hear myself on the talk back. Now if i unkey the mic and start over most of the time it works fine. I can also key the mic and move the button around alittle i get some static interference in it...

I am on my second cobra mic and now it wants to cut out on me while I’m talking. I can tell it’s in the button because I can wiggle it and get it to cut up. Not wanting a power mic, cb has been professionally tuned/peaked and don’t want the sqeeling. Thanks

Thanks guys !!

Is it possible to actually under drive a TS 667V ? All this talk about tickeling the driver with a very low dead key. What if u had a low dead key of 1 and a swing of 5 or 6. Would that be under driving it ? Thanks

Ok thanks for your help

Yea I can see why.. lol That thing has undershot everything that it has been hooked up to.. haha