• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Recent content by MusicODC

  1. M

    rci 2950/2970 internal talk back

    Bells CB has a video on this
  2. M

    Kenrich Eagle 500-Next Patient

    anyone know of a good replacement for the BIG relay?
  3. M

    Kenrich Eagle 500-Next Patient

    I'll wait to hear what you find out.... BTW, the 3 axial caps (actually all)are available through Mouser
  4. M

    Kenrich Eagle 500-Next Patient

    i need to find out what the brown disc caps are down around the tubes. The schematic(CB Tricks)is blurry & it's not too good a situation inside the Eagle to see what thy are.
  5. M

    Navaho TRC-458 Clarifier mod?

    I need to know what resistance R117 is
  6. M

    Sirio Vector 4000 tuning

    you can adjust the top to about 25 & ¾ inches, the gamma rod to around 22 & some odd fraction... may want to put support @ the top of the ring identical to the center support(s)piece
  7. M

    BB-1 ECHO BOARD ie BANDIT ECHO BOARD WORLDS SMALLEST

    you and Leapfrog are nutzz
  8. M

    BB-1 ECHO BOARD ie BANDIT ECHO BOARD WORLDS SMALLEST

    Could anyone send me the instructions for the bb-2 echo board?? craig.finley@gmail
  9. M

    GALAXY 979 INSTALLING ECHO BOARD

    You don't need a 8 volt source, use the 12 volt off the on/off switch.. echo board,you"ll have to disconnect the black wire from the mic board,solder "in"(white) directly to pin 2 on the back of the board, out to black wire, both grounds to the mic board ground.
  10. M

    GALAXY 979 INSTALLING ECHO BOARD

    I'm trying to figure out which wire is audio on the board on the back of the mic jack. brown? yellow is the transmit , red does nothing
  11. M

    help with a galaxy echo board install

    I've read of what's been posted about installing an echo board in the Galaxy 959's...but which wire(s)do I use to hook it up to? brown(going down to board along with the red)??yellow is transmit ,red is ??My board has two white leads ,one in, one out plus the ground shield
See more
Top Bottom
Back