You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
I lost the load on my maco 5/8, i built the balun from this site http://www.g8jnj.net/cometcha250b.htm it is basically a clone of the cha-250. seams to work well, but it is pretty broadband.
Hay watch it now, i had 303hp / 277tq out of that 2.3l it was amazing what a turbo setup with thunder chicken fuel injection would do.. boy that was a fun car..
Is this what you are looking for ?
Debunking AMC Modifications
This article has been in the works for some time and has been painstakingly researched. The
information contained herein applies to all operators of am transmitters. The all too rampant
fad involving the destruction/alteration of...
Anyone Have A PACER Account, or access to one, I need something looked up. Someone I knew got arrested for pretty bad, and I wanted to see the court documents.
Thanks
Wile
ARDUINO ROTATOR COMPUTER INTERFACE AND CONTROLLER
Arduino Rotator Computer Interface and Controller | Radio Artisan
Most likely overkill for what you want to do, but it works awesome with Ham Radio Deluxe..
you should be able to calibrate that meter, through the menu settings, all wattage numbers are calculated in to a 50 ohm load, so if you are not using a 50 ohm load your numbers might vary a little.
I have built quite a few Arduino projects.. the one i use the most is the Icom Tune Controller for the IC-7000... It will take the radio from what ever mode it is in and power setting and change it to RTTY, 15W and key the radio until I press the button again, then it puts everything back where...
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.