• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Sears RoadTalker Road Talker 40 Model 562 Base / Mobile CB Radio power cord

danmcclain

Well-Known Member
Dec 11, 2020
673
345
73
73
Looking for a 110v power cord for the above radio. Any help would be appreciated. Thanks, Dan
 

Heres what i found at kens
http://www.kenselectronics.com/lists/pwrcord.htm
CEA-CRST-AC fits Hitachi-5: Cobra 85, 86XLR, 135, 135XLR, Sears 562.3820700, Penney, RCA, Zenith
Thanks, but the pin configuration is a bit different....
s-l1600.jpg
 
  • Like
Reactions: Tokin
Thanks, but the pin configuration is a bit different....
s-l1600.jpg
I have a feeling that the only cord you're going to find will be a 2 hole plug that fits the 2 ac pins with the 3/8" spread as described at Kens. I dont believe youll find that 5 pin plug unless someone here has one squirreled away. In any case call Ken and he'll know what will work.
 
  • Like
Reactions: AudioShockwav
I have a feeling that the only cord you're going to find will be a 2 hole plug that fits the 2 ac pins with the 3/8" spread as described at Kens. I dont believe youll find that 5 pin plug unless someone here has one squirreled away. In any case call Ken and he'll know what will work.
Thanks Tokin, will call Ken and see what he has to say... And if I remember right I may have some 2 hole plugs...
 
  • Like
Reactions: Tokin
I have a feeling that the only cord you're going to find will be a 2 hole plug ..........
In any case call Ken and he'll know what will work.

Ken is a great resource for a lot of old stuff, I was working on a old Robyn 40 ch AM radio that had a bfo so you could rx ssb on it.
Ken had a service manual for it, not a photocopy but a actual factory manual and he sent a owners manual with it.
He is good people to deal with.

73
Jeff
 
Ken is a great resource for a lot of old stuff, I was working on a old Robyn 40 ch AM radio that had a bfo so you could rx ssb on it.
Ken had a service manual for it, not a photocopy but a actual factory manual and he sent a owners manual with it.
He is good people to deal with.

73
Jeff
I lived 2 miles from kens for 20+ years. Kens is one of the reasons i got into radio. Hes definitely a pack rat and throws absolutely nothing away. His shop back in the day was so packed full of stuff you could hardly move around.
If you needed something obscure you could bet ken would have at least one squirreled away. I wish i had more reasons to spend money in his shop.
 
  • Like
Reactions: Shadetree Mechanic
Ken is a great resource for a lot of old stuff, I was working on a old Robyn 40 ch AM radio that had a bfo so you could rx ssb on it.
Ken had a service manual for it, not a photocopy but a actual factory manual and he sent a owners manual with it.
He is good people to deal with.

73
Jeff
Thanks for the info Jeff, I'll check it out...
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ Wildcat27:
    Hello I have a old school 2950 receives great on all modes and transmits great on AM but no transmit on SSB. Does anyone have any idea?
  • @ ButtFuzz:
    Good evening from Sunny Salem! What’s shaking?
  • dxBot:
    63Sprint has left the room.
  • dxBot:
    kennyjames 0151 has left the room.