Search results

Still there have not heard from you in over a week, Just wondering.

People on Facebook? Ok that speaks volumes to your attitude. But just to show you no hard feelings don't use your little bag of trimmer "pots" be sure they are trimmer "Caps" there is a big difference.

Funny you mention the upc1156H I just received 2 of those in the mail as I have a Robyn 510D mobile that oddly enough was given to me 5 years ago the man said he didn't even get to use it as he hooked it up backwards so to speak it looks like a brand new radio but I put it on the shelf and...

Well if you can actually read schematics that should also mean you can tell the difference between "RECEIVE" circuits, PLL circuits, Transmitter circuits, VCO circuits, AGC circuits, Mic Preamp circuits, Receive mixer stages, Transmit mixer stages, Audio amp stages and of course "BALANCED"...

If the ribbon cable is with it that is fine as well. Let me know what you need for it and shipping and I will get it to you. Oh I assume it worked you just replaced it with something else.

If this is what you have I'm interested.

Thought I would ask you never know. I brought back from the dead a PRESIDENT WASHINGTON it tested my patience and forced me to get back to what I used to teach with respect to the proper approach to trouble shooting, anyway. After fixing all the problems it become obvious the channel selector...

Like Nomad I try not to work on radios anymore that I know it will be a real problem to find parts for, That being said I think if you still have the original meter you may be able to find that type meter in another radio and you can remove the face behind the needle and place it another meter I...

Wow have not done this for a bit. The below list is partial but all have been repaired in the last several weeks and have an old galaxy base on the bench right now. SBE LAND COMMAND LCBS-8 COBRA 142 GTL FOR A MAN IN OREGON COBRA 2000 GTL COBRA 148 GTL (X) 4 1 PILL MOBILE AMP 2 PILL MOBILE AMP...

The 45 watts is most likely the Power Supply rating not the RF.

With my credentials that I will not go into you would think I would be able to find all problems in a matter of minutes but NO! that isn't the way it works. I have been guilty of jumping to the end of line only to say Ok Dennis this isn't working so do like you taught it in Tech School and that...

Well yes, a cap could cause issues like that, what I was wondering is if the only current spike he seen was 20 milliamps it most likely would not be a cap shorting a regulated source down to nothing. I'm kind of in the bad solder issue of some kind if the switch is not the issue. We will see...

If the power switch is the problem simply put a test probe on the switched side, turn on the switch if you have power on both sides of the switch then on to other issues. If it is a capacitor that would also be easy to track down especially if voltage is being supplied to the board one would...

If you remember I did ask you if you had that switch on? Good that is that it was.

Ok, best I can remember the filament voltage is mostly isolated from the rest of the radio simply meaning there is either a break in the voltage supply or the heater switch is faulty or there is an issue in the AC line plug that connects pin 9 to pin 11 which in turn delivers the 12.6 vac to the...

I assume the heater switch on the front is on? Just making sure.

Does it Receive? The reason I ask this is because there should be an accessory plug in the back next to the SO239 antenna plug if it's missing it will not allow the tubes to get filament voltage if the seller is a tech he may have done a cold neutralization adjustment and forgot to put the plug...

Does it Receive?