Search results

Does anybody know where or someone close to me here in FL to check 8 tubes for me I don't want to buy a tester just to test 8 tubes or a trusted place to get them checked when I got them with the Palomar 300a 6lf6 they have a piece of tape some say 95% others say 87% in case I do decide to...

i have a chance to buy this amp=Heathkit HA-10 Warrior 1kW I know it's from the 70s but in good condition is it a clean amp or splatter box even if you don't over-drive it ?? Compared to my Palomar 300A It's already modified to use with today's modern radios the guy said

thanks took the test june 11 and pass only 4 wrong

channel 9 has become the local Spanish channel for PR and beyond they are using it as their Super Bowl channels base station key downs just about everytime there is skip

why it seem that a 40-10 EFHW 56.1 is a tad harder to tune compared to the same antenna except with a 49.1 transformer I can tune it in under 5 minutes .1.3 SWR on 40,20,15 meters the 56.1 I'm still trying to fine-tune the best I get is 40,20 meters swr 1.5

Sold

well hard work paid off only 4 wrong all for just an extra 10 more channels LOL

well tomorrow morning i test for extra. It was a challenge all that reading but well worth it

4 sale 2 bird 43 slugs element sold the meter no longer need them $125. for the 250-watt and $145 for the 1000-watt plus shipping

thanks

isn't that what being a ham is all about building modifying breaking it fixing it again I have no use for it on the CB band where I live if you don't have 5000 watts for a driver you just be watching your CB like a sony tv

looking for an open mind thinking can I take my Serio 2016 5/8 wave covers from=26.4 to 28.2 Mhz it's 20.01312 ft tall I want to modify it for HF possibly 40 to 10 the 10-meter band is there now I need the rest need to change. possible base coil needs to be modified need advice as to where to start

4 sale astatic 575 m6 use but working asking $125. plus the ride

thanks

hello does anybody know what is this wire support bracket is called? Look at pic

Here is an update my OCD and Marine attitude would not take defeat after a phone call this morning I fixed my problem the trimmer shown in the picture took care of my input best I can get is 1.4 from almost 2.8

Thanks, Shockwave

being that the driver section is not being used. would 40 to 60 watts drive from the radio be considered a safe zone.?? For SSB

so without sending it to a shop, it will be cost-effective, and cheaper to buy a ham amp. 300A will be a splatter box on 40,20 ??

Is there a way to make the 20,40 band on a Palomar 300A have a lower input as it does on the 10-meter band with the input and output trimmers I was tunning on 20 meters today but my Yaesu ft-890 kept flicking a high SWR light I turned the auto tuner on it kind of helped but made the tuner get...